MAX9160的技术资料

MAX9160的产品特征：
◆LVDS or LVTTL/LVCMOS Input Selection
◆LVDS Input Fail-Safe Sets Outputs High for Open,Undriven Short, or Undriven Parallel Termination
◆Two Output Banks with Separate Bank Enables
◆Integrated Output Series Termination for 60Ω Lines
◆200ps (max) Output-to-Output Skew
◆±100ps (max) Peak-to-Peak Added Output Jitter
◆42% to 58% Output Duty Cycle at 125MHz
◆Guaranteed 125MHz Operating Frequency
◆LVDS Input Is High Impedance with V_CC= 0V or Open (Hot Swappable)
◆28-Pin Exposed- and Nonexposed-Pad TSSOP or 32-Lead QFN Packages
◆-40°C to +85°C Operating Temperature
◆3.0V to 3.6V Supply Voltage

MAX9160的技术参数：
V_CC to GND..............................................................-0.3V to +4V
IN+, IN- to GND........................................................-0.3V to +4V
SE_IN, EN_, SEL, RSET, OUT_ to GND........-0.3V to V_CC+ 0.3V
Output Short-Circuit Duration (OUT_) (Note 1)..........Continuous
Continuous Power Dissipation (T_A= +70°C)
28-Pin TSSOP (derate 12.8mW/°C above +70°C).....1024mW
28-Pin TSSOP-EP (derate 23.8mW/°C above +70°C)..1904mW
32-Pin QFN (derate 21.2mW/°C above +70°C).........1704mW
Storage Temperature Range.............................-65°C to +150°C
Junction Temperature......................................................+150°C
Operating Temperature Range...........................-40°C to +85°C
ESD Protection
Human Body Model (IN+, IN-).......................................±16kV
Human Body Model (SE_IN)............................................±8kV
Soldering Temperature (10s)...........................................+300°C

MAX9160的产品描述：

The MAX9160 125MHz, 14-port LVTTL/LVCMOS clock driver repeats the selected LVDS or LVTTL/LVCMOS input on two output banks. Each bank consists of seven LVTTL/LVCMOS series terminated outputs and a bank enable. The LVDS input has a fail-safe function. The MAX9160 has a propagation delay that can be adjusted using an external resistor to set the bias current for an internal delay cell. The LVTTL/LVCMOS outputs feature 200ps maximum output-to-output skew and ±100ps maxi-mum added peak-to-peak jitter.The MAX9160 is designed to operate with a 3.3V sup-ply voltage over the extended temperature range of -40°C to +85°C. This device is available in 28-pin exposed- and nonexposed-pad TSSOP and 32-lead 5mm x 5mm QFN packages.